MWM
Rechteckrohre mit Radius
Material
AlMgSi0.5 F22
(EN AW 6060 T 66)
Available surfaces**
Bright chrome plated
Stainless steel colored anodized
Natural color anodized (E6EV1)
Other surfaces on request.
*) Due to manufacturing reasons, it is possible that there may be slight deviations with the maximum length of 6,000 mm.
ATTENTION: For small quantities up to 500 kg, for anodized surfaces, the maximum length is 5,030 mm due to manufacturing reasons.
**) Due to production reasons, it is possible that there is no surface coating on the contact surfaces at the ends of the profiles (up to 80 mm)
Lengths up to 6,000 mm*
Rectangular tubes with radius
The aluminum rectangular tubes with radius profiles are delivered in standard stock quality. What does that mean?
Standard stock quality means that the raw material or the raw aluminum rectangular tube with radius profile according to below. Standards:
EN 573-3
Chemical composition and product forms
EN 755-2
Mechanical properties
EN 755-1
Technical terms of delivery
EN 755-3/-4/-5/-9
Profiles, tolerances on dimensions and form
The above-mentioned standards regulate the tolerances of the limit dimensions, alloy components, properties and delivery conditions of a material.
When refining aluminum rectangular tubes with radius profiles, the limit dimensions and the alloy components are of particular importance . The limit dimensions not only describe the external dimensions of the aluminum rectangular tube with radius profile with the tolerance dimensions but also the maximum tolerable roughness depth of the aluminum rectangular tube with radius profile. (Press structure, press groove depth, waviness, …)
Refined aluminum rectangular tubes with radius profiles in standard stock quality always have visible ripples and press structures, which cannot be removed for production reasons.< /strong>
Reason: The standard storage quality is originally only designed for technical applications.
The alloy components provide information about which substances are in the Aluminum rectangular tube with radius profile can be pressed together. Aluminum rectangular tubes with radius profiles in standard stock quality can contain alloy components that are disruptive to the finishing process and lead to small surface defects such as specks, small holes or dark stripes. The above-mentioned material-related appearances do not justify a complaint, as we cannot influence this. However, experience shows that these “surface characteristics” As a rule, they remain undetected because they are hardly noticeable visually.
Beyond this, better surfaces can only be achieved with specially made aluminum rectangular tubes with radius profiles, whereby the purity and surface are then taken into account. The quality of the raw material can be better defined and thus an even better final surface can be produced. However, a minimum pressing quantity of 500 kg and, if necessary, the purchase of a special tool for production are required.
Talk to us - We're here to help !
Material
AlMgSi0.5 F22
(EN AW 6060 T 66)
Available surfaces**
Bright chrome plated
Stainless steel colored anodized
Natural color anodized (E6EV1)
Other surfaces on request.
*) Due to manufacturing reasons, it is possible that there may be slight deviations with the maximum length of 6,000 mm.
ATTENTION: For small quantities up to 500 kg, for anodized surfaces, the maximum length is 5,030 mm due to manufacturing reasons.
**) Due to production reasons, it is possible that there is no surface coating on the contact surfaces at the ends of the profiles (up to 80 mm)
Lengths up to 6,000 mm*
Contact
MWM GmbH & Co. KG
Hüttenstraße 12
59759 Arnsberg / Germany
Phone
+49 29 32 / 4 75 98 - 01
Fax
+49 29 32 / 4 75 98 - 10
E-Mail
info@mwm-arnsberg.de
About MWM
MWM sees itself as a system supplier in the production of goods and the processing of components made of aluminium, stainless steel, brass and other non-ferrous metals.
We offer our customers full-service solutions in many areas, including the procurement of the necessary raw materials and processing through to surface finishing and subsequent assembly.
Tip
MWM Design
Real stone veneer for indoor and outdoor applications. Find out more now.
© 2023 MWM GmbH & Co. KG • Hüttenstr. 12 • 59759 Arnsberg • info@mwm-arnsberg.de